Dartboard Height and Distance: Official Setup Measurements
Hanging a dartboard looks simple until you pick up a tape measure and realise every source seems to quote a slightly different number. Get it wrong and your practice at home will never quite match the board at your local pub or club, so those hours of throwing count for less than they should. The good news is that the official measurements are fixed, precise, and used the world over. Nail them once and your setup is sorted for good.
This guide gives you the exact, verified figures in both imperial and metric, explains the clever diagonal trick that guarantees accuracy, and walks you through setting the board up safely at home.
The official measurements
Steel-tip darts are governed by the same core measurements across the major bodies, including the World Darts Federation, the PDC, and the WDF. Two numbers matter above all others.
The centre of the bullseye sits 5 ft 8 in (1.73 m) from the floor. This is measured vertically from the ground to the middle of the bull, not to the top or bottom of the board.
The throwing distance is 7 ft 9.25 in (2.37 m), measured horizontally along the floor from the face of the board to the throwing line. That throwing line is called the oche, and we will come back to it shortly.
Those two figures are the ones you must get right. A third measurement, the diagonal, is not a rule in itself but a brilliant way to check your work, and it should read 9 ft 7.5 in (2.93 m) from the centre of the bull to the point on the floor directly behind the oche.
Here is everything in one place.
| Measurement | Imperial | Metric |
|---|---|---|
| Bull height from floor | 5 ft 8 in | 1.73 m |
| Throwing distance (steel-tip oche) | 7 ft 9.25 in | 2.37 m |
| Diagonal (bull to floor behind oche) | 9 ft 7.5 in | 2.93 m |
| Throwing distance (soft-tip, typical) | 8 ft | 2.44 m |
How to measure correctly: the diagonal trick
The two headline numbers are measured on different planes, and that catches people out. Height is vertical, distance is horizontal, and a small error in either one throws off the whole setup.
Start with the height. Fix the board so the centre of the bull is exactly 5 ft 8 in above the floor. Use a spirit level to confirm the board is not tilted, because a board that leans forward or back changes the effective playing surface.
Next, measure the throwing distance. From the point on the floor directly below the face of the board, measure out 7 ft 9.25 in horizontally. That spot is where the front edge of your oche goes.
Now for the clever part. Because the height and the distance form two sides of a right-angled triangle, the straight-line diagonal between the centre of the bull and the floor behind the oche is fixed at 9 ft 7.5 in. Stretch a tape from the bull down to that floor point. If it reads 9 ft 7.5 in, your height and distance are both correct at the same time. If the number is off, one of your two measurements is wrong, and you can adjust before you commit. It is the single fastest way to verify a setup without a second person.
What is the oche?
The oche (pronounced "ockey") is the line a player must stand behind to throw. It is the darts equivalent of the free-throw line, marking the minimum legal distance from the board. You can toe the line but never step over it.
The word itself has a debated history. One popular account traces it to an old brewery, Hockey and Sons, whose crates were reputedly used to mark the throwing distance in early pub games. Whatever its true origin, the oche is now the universal name for that all-important line, and it is exactly why we named our scoring app OCHE. Once your board is up and your line is marked, OCHE keeps score for you, handles the checkout maths, and lets you focus on the throw rather than the arithmetic.
Steel-tip vs electronic
If you are setting up a soft-tip electronic board rather than a traditional bristle board, one number changes.
The height stays identical at 5 ft 8 in (1.73 m) to the centre of the bull. That never changes between the two disciplines.
The throwing distance is usually longer for soft-tip, commonly set at 8 ft (2.44 m) by soft-tip federations such as those affiliated with electronic darts organisations. The slightly greater distance reflects the different weight and flight of soft-tip darts. Always check the rules of the specific league or machine you play on, as some venues stick with the steel-tip distance for consistency.
If your household plays both, mark two lines on the floor and label them clearly so nobody argues mid-game.
Setting up at home
Getting the numbers right is half the job. A good home setup also protects your walls and your darts.
Choose a solid wall. Mount the board on a firm surface such as brick or a stud you can screw into securely. A wobbly board bounces darts out and quickly works its mountings loose.
Protect the wall. Stray darts are inevitable, especially early on. A dartboard surround, a sheet of cork, or an old cabinet backboard saves your plaster and your dart points. Surrounds also cut down on the noise of misses.
Light it well. Shadows on the board cost you accuracy. Aim for even lighting from above and slightly in front so the wires do not cast lines across the numbers. Dedicated dartboard lights exist, but a couple of well-placed spotlights work just as well.
Mark the oche and mat. Lay down a raised oche marker or a proper dart mat with the throwing line printed on it. A mat also protects your floor from dropped darts and gives you a consistent standing position every single time.
Leave room to throw. You want a clear run-up of at least the throwing distance plus a comfortable step or two behind it, so give yourself a couple of metres of clear space in front of the board.
Common mistakes
A few errors come up again and again.
Measuring to the wrong point. Height is always to the centre of the bull, and distance is always from the face of the board. Measuring to the floor below the front of the board rather than a true horizontal is a frequent slip.
Forgetting the horizontal. If your board hangs above a skirting board or the wall is not flush with the floor, measure the throwing distance as a true horizontal line, not along a sloping surface.
Ignoring board tilt. A board that leans even slightly changes both the height and the distance. Level it properly.
Trusting the tape once. Always run the diagonal check at 9 ft 7.5 in. It takes ten seconds and catches almost every mistake.
Get these figures right and your home board plays exactly like the ones in tournaments. Set it up carefully, mark your oche, and let the practice do the rest.
Keep score with OCHE 🎯
301, 501, Cricket and 22 modes. Voice caller, checkouts, stats. Free, offline.
Download for free